Setup Mode

Upon initial start-up, the controls will ask to confirm the settings for the fryer.

  1. When the main power switch is turned on, “OFF” shows in both displays. Press the heat button on either side and *SETUP* *MODE* displays followed by “LANGUAGE” on the left display, “ENGLISH” on the right display.

  2. Use the left and right arrow buttons buttons to change the operation display to, “FRANCAIS”, “CAN FREN”, “ESPANOL”, “PORTUG”, “DEUTSCHE”, “SVENSKA”, “РУССКИИ”.

Menu Step Description

ZONE

USA, EUROPE or OTHER

TEMP FORMAT °F or °C
TIME FORMAT 12-HR or 24-HR
ENTER TIME

Time of day (use product buttons to change)

ENTER TIME AM or PM
DATE FORMAT MM-DD-YY or DD-MM-YY

ENTER DATE

Today’s date (use product buttons to change)

FRYER TYPE ELEC or GAS
VAT TYPE FULL OR SPLIT
BULK OIL DISPOSE?

YES or NO

1. NO or VAC: Select for vats drained with an oil drain caddy.

2. RTI: Select for vats drained with an RTI switch.

3. REAR: Select for vats without a secondary switch.

4. FRONT: Currently not used (01/18).

BULK OIL SUPPLY

YES or NO

DAYLIGHT SAVING TIME

1.OFF

2.US (2007 & after)

3.EURO

4.FSA (US before 2007)

OIL QUALITY ENABLED

YES or NO

TPM WARN (value can be set to 0% - 40%)
TPM MAX (value can be set to 0% - 40%)

Setup mode can also be accessed as part Level 1 programming after initial Setup. To access:

  1. Press and hold Temp and Info buttons until LEVEL - 1 , followed by ENTER CODE display.

  2. Enter code 1, 2, 3, 4 (first 4 product buttons). “PRODUCT” and “SELECT” display.

  3. Press the Down arrow button 3 times and “FRYER SETUP” displays.

  4. Press the Confirm button and *SETUP* *MODE* displays, followed by, “LANGUAGE” on the left display, “ENGLISH” on the right display.