Operating the Burners

Lighting Of The Burners

  1. Turn the power switch to the off position.

  2. Wait at least 5 minutes and then turn power switch to the on position.

  3. Press the heat button on the controls (left or right).

  4. The burner lights and operates in a Melt Cycle until the oil reaches a preset temperature.

  5. Once the display shows a product selection or a double dashes, press the desired product button.

NOTE: The fryer is equipped with a ignition spark module which has a set ignition safety time (TSA) of 90 seconds.

Shutdown Of Burners

  1. Press either heat button on the controls.

  2. Turn the power switch to the off position.

NOTE: This turns off all vats.