Disposing of Oil into Disposal Container

To avoid personal injury: Use PPE Do not overfill the oil disposal shuttle.

The ODS holds approximately half the volume of oil contained in the vat. To prevent splashing and spillage, drain no more than half of the oil in to the ODS at one time.

Burn Risk To avoid burns, use PPE when connecting to or disconnecting from oil disposal unit.

To avoid personal injury, ensure cover is in place before moving shuttle.

1. Remove the oil disposal shuttle from under fryer and replace with the filter pan assembly.

2. Close and latch the cover and roll oil disposal shuttle to disposal container.

   

3. Press down on top of brake to secure unit in place.

   

4. Disconnect fitting from top of ODS and connect to disposal container.

   

5. Using the power cord on the back of the shuttle handle, plug it into the short cord from the junction box.

6. Turn power switch to the ON position.

   

7. Plug the shuttle electrical cord into the receptacle under the disposal container control, and then press & hold switch on container controls to pump oil from shuttle to the container.

8. Once shuttle is empty, release switch and unplug the electrical cord and wrap back onto the hook on the shuttle handle.

9. Using gloves or protective cloth, disconnect the fitting from the disposal container and connect it back onto the shuttle.