Disposing Oil into Disposal Container

To avoid personal injury:

  • Use PPE

  • Do not overfill the oil disposal shuttle.

The ODS holds approximately half the volume of oil contained in a Velocity vat. To prevent splashing and spillage, drain no more than half of the oil in to the ODS at one time.

Burn Risk

To avoid burns, use PPE when connecting to or disconnecting from oil disposal unit.

To avoid personal injury, ensure cover is in place before moving shuttle.

 

Disposing Oil into a Powered Disposal Container

These instructions are for disposing into a disposal container that has a motor and switch.

  1. Remove the oil disposal shuttle from under fryer.

  2. Close and latch the cover, and then roll oil disposal shuttle to a powered disposal container.

  3. Disconnect the quick disconnect fitting from the top of the ODS, and then connect to a powered disposal container.

  4. Using the power cord on the back of the shuttle handle, plug one end into the short cord from the ODS switch junction box.

  5. Turn the ODS power switch to the ON position.

  6. Plug the shuttle electrical extension cord into the receptacle under the disposal container control.

  7. Press and hold the container's power switch to pump oil from the shuttle to the container.

  8. Once shuttle is empty, release switch and unplug the electrical cord and wrap back onto the hook on the shuttle handle.

  9. Using gloves or protective cloth, disconnect the quick disconnect fitting from the non-powered disposal container and connect it back onto the shuttle.

  10. Replace the filter pan assembly.

Disposing Oil into a Non-powered Disposal Container

These instructions are for disposing into a barrel type container that doesn't have a switch or motor.

  1. Remove the oil disposal shuttle from under fryer.

  2. Close and latch the cover, and then roll oil disposal shuttle to non-powered disposal container.

  3. Disconnect the quick disconnect fitting from the top of the ODS, and then connect to a non-powered disposal container.

  4. Using the power cord on the back of the shuttle handle, plug one end into the short cord from the ODS switch junction box.

  5. Plug the other end of the power cord into an electrical outlet.

  6. Turn the ODS power switch to the ON position. Oil pumps into the non-powered disposal container.

  7. Once the shuttle is empty, turn the ODS power switch to the OFF position.

  8. Unplug the electrical cord and wrap back onto the hook on the shuttle handle.

  9. Using gloves or protective cloth, disconnect the quick disconnect fitting from the non-powered disposal container and connect it back onto the shuttle.

  10. Replace the filter pan assembly.