C1500 Programming

Introduction

The controls are preset from the factory, but desired functions can be programmed in the field. Press and hold the Program button until PROG MODE displays.

NOTE: If LOCK displays during procedure, see Special Programming to unlock.

Change Set-Point Temperatures

This mode allows the operator to change and set various parameters for each product.

  1. Press and hold the Program button until PROG MODE displays.
  2. Press the desired product button. The LED above the button is on, TEMP displays and the set-point temperature flashes.
  3. Press and hold the arrow buttons to change the set-point temperature by increments of 5.
  4. Release the arrow buttons, the set-point is changed after 2 seconds.
  5. To reset the set-point temperature to the default settings, press and hold both arrow buttons simultaneously.

Assign a Product to Timer

  1. To assign a product to a timer button, press product button and then the desired timer button. XXXX is displayed if the product doesn’t match the current set-point.
  2. To change to a new product (and set-point) press and hold the timer to choose the new setpoint.
  3. Once the new set-point is chosen, press the timer button to start the cook cycle.
    • Full vat operation: Only products with the same set-point and with the LED’s on, can be selected for cooking .
    • Split vat operation: Products with two different set-points and with the LED’s on, can be chosen.

Change Product Cook Time

  1. Press and hold the Program button until PROG MODE displays.
  2. Press the desired Product button. The LED above the button displays and the set-point temperature flashes.
  3. Press the Program button and TIME displays. The cook time flashes.
  4. Press the arrow buttons to change the product cooking time.
  5. Once the arrow buttons are released, the time is saved after 2 seconds.
  6. To reset the cooking time to the default settings, press and hold both arrow buttons simultaneously.

Programming Alarm

  1. Press and hold the Program button until PROG MODE displays.
  2. Press the desired product button. The LED above the button is on and the set-point temperature flashes.
  3. Press Program button twice and ALRM displays 0:00 flashes.
  4. Press the arrow buttons to set an alarm in a cook cycle. Example, if an alarm is to sound 30 seconds after starting a 3 minute cook cycle, set to the alarm to 2:30.
  5. Once the arrow buttons are released, the alarm is saved after 2 seconds.