Info Mode Menu Overview

Displays the history of the last 25 error codes starting with the most recent code first. Codes includes the date and time that the error occurred. These are listed newest at top to oldest at bottom.

Displays information about the most recent cook cycle, including total cook time, early stops, if timer is left beeping too long and min./max./avg. temperatures.

Displays operating statistics for each of the past seven days, including hours on, cook cycles, number of filters, etc.

Displays ongoing accumulations of operating statistics, which continues to accumulate until a manual reset is performed. To reset (requires pass- word), navigate to the bottom of the list.

Displays history of Activity Log events as:

• On/Off

• Start/Stop Cook

• Filter

• Pan Removed or Replaced

Displays live temperature reading for the CPU (controller), software version, and software part number.

Displays live readings for main oil, level probe, and the bottom of vat temperature.

• ✓ - Signal present

• - - No signal present

• A - Power Switch

• H - High Limit

• D - Drain Switch Jumper

• S - Power Switch Interlock

• F - Fan Switch Jumper

• ✓ - Signal present

• - - No signal present

• 24dc - 24 DC Supply

• Pan - Filter Drain Pan

• ✓ - Signal present

• - - No signal present

• DTF - Discard Tank Full

• FULL - Discard tank is full and cannot dispose to it

• OK - Discard tank not full, okay to dispose

Displays pump pressure reading if optional transducer is installed in plumbing manifold as:

• * - On

• - - Off

otherwise displays NO SENSOR.

• * - On

• - - Off

• Pri - Primary Contactor

• Ht - Heat (regulating) Contactor

• Pr - Pressure Solenoid

• BSV - Bulk Supply Valve (optional)

• Par - Partially open

• Stp - Forced Stop

• Opn - Fully Open

• Cls - Fully Closed

• ► - The current state of the drain valve

• At - indicates the drain valve position

  • 0 - Fully Closed

  • 20+ - Fully Open

• * - On

• - - Off

• Fltr - Filter Pump

• ATO - Top Off Pump

• Bulk - Bulk oil Supply

Displays analog input readings directly from ADC chip displayed as volts and as ADC counts (bits). Use the up and down arrows to step through available inputs.

Displays the status and size of the controls internal microSD storage memory as:

• ✓ - Memory OK

• X - Memory problem

If installed, displays the status and size of the USB flash drive as:

• ✓ - Flash Drive OK

• X - Flash Drive not present or drive error

• hcc - 16 is normal if no USB drive is plugged in

Scroll down to see flash drive volume name.

• LVL - Levels:

  • FULL

  • LOW

  • Displays when an assessment is not possible

• Delta - Displays the temperature difference between the main probe and the level probe.

• Cnt - Count shows how many ATO pulses have been generated in the current top-off attempt.