Product Racking Recommendations

NOTICE -

To avoid equipment damage, do not clean stainless steel with abrasive tools, abrasive cleaners or corrosive chemicals.

The bottom position is to be avoided on small loads because it is closer to the cold zone. The oil is cooler at the bottom of the vat and hotter at the top. With bigger loads, however, there is generally enough turbulence in the oil that the bottom rack gets sufficient heat. The top position is to be avoided on small loads because of insufficient oil coverage. With bigger loads, the top rack has good oil coverage because the volume of product on the lower racks raises the overall oil level.

General Market 2 Head Bags

  • 8-Head: Loads all four racks as shown above.

  • 6-Head: Loads racks 1, 2, and 3 only.

  • 4-Head: Loads racks 2 and 3 only.

  • 2-Head loads rack 2 only.

  • 4-Bags: Loads all four racks as shown above.

  • 3-Bags: Loads racks 1, 2, and 3 only.

  • 2-Bags: Loads racks 2 and 3 only.

  • 1-Bag: Load rack 2 only.