FOR

Daily Start-up

If the oil is below 180° F (82° C), with the Main Power switch in the ON position, the display flashes START UP and AUTO MELT MELT. The oil heats slowly to prevent scorching of the oil. The heat cycles on and off to slowly heat the oil. When the oil temperature reaches 215° F (102° C), Auto Melt Melt mode terminates and the fryer begins heating up to the Auto Mix temperature of 360° F (182° C). During Start-up, the display informs the user by displaying a bar graph to represent the stages of the startup process. These stages consist of the following:

• Melt (Mlt) - Auto melt mode.

• Melt (Mlt) - Melt mode.

• Mix (Mix) - Automatic filter to ensure oil is mixed to prevent cold pockets.

• Top Off (Top) - Checks to see if oil level is filled to the proper mark. If the unit senses the oil level is low, it completes an Auto Top Off.Always add oil to the Top Off Tank in the morning, and top-off throughout the day as necessary.

• Polish (Pol) - The unit completes a polish cycle.

  

• During each stage, the bar graph fills as each stage completes.

• The duration of each stage depends on the temperature of the oil at the initial start and the programmed setpoints.

• Once start-up is complete, the display goes to the main cook menu and is ready for operations.

HOME