Auto Top-Off

During normal operation, the control automatically monitors vat oil level. If the control senses oil level is too low, the unit automatically pumps oil from JIB (oil reservoir) into vat to keep oil at the proper level.

The JIB (oil reservoir) must be filled at least once a day, preferably in the mornings. This helps prevent an “E-1” error code. See Error Codes.

Manual Top-Off

If oil level is a little low, oil can be added to vat at any time from JIB (oil reservoir) to raise oil level to proper level by following steps below. This procedure is NOT to be used to fill an empty vat.

  1. Press and hold the Filter button (either one-full vat) *FILTER MENU* displays, followed by 1.EXPRESS FILTER.
  2. Press the 1 button, FILL and DONE displays.
  3. Press and hold the left Timer button, FILLING displays and oil is pumped from the oil reservoir to the vat.
  4. Once vat is full, release the left Timer button, FILL and DONE displays.
  5. Press the right Timer button and then 3 for normal operation.