Components

Front View

Item No. Name Description
1 Control Panel

Touch screen control used for operating the cabinet, setting parameters, and menus.

See Operating Controls.
2 USB Port Used to upload menus and settings and download data to a USB drive.
3 QR Code Scan with a smart phone to access training videos and other helpful content.
4 Power Switch Used to safely power on and off the unit to heat shelves to operating temperature.
5 Mounting Standoffs

Used to mount wire accessories to the outside of the cabinet, such as cups, napkins, plastic-ware, condiments, etc.

NOTE: These can be reused from an existing unit, or can be purchased through your KES. Not available through Henny Penny.
6 Heated Shelves (slots) Each slot has a top and bottom heater, regulated by the temperature set for the menu item assigned to that row.

Rear View

Item No. Name Description

1

 Reset Breaker Under unexpected conditions the reset breaker will pop out. Press to reset. Contact Technical Support if needed.
2 Control Panel

Touch screen control used for operating the cabinet, setting parameters, and menus.

See Operating Controls.
3 Equipotential Ground Lug Used to link adjacent equipment to ground. Required in CE countries.
4 QR Code Scan with a smart phone to access training videos and other helpful content.
5 Mounting Standoffs

Used to mount wire accessories to the outside of the cabinet, such as cups, napkins, plastic-ware, condiments, etc.

NOTE: These can be reused from an existing unit, or can be purchased through your KES. Not available through Henny Penny.

6

Row Number

Indicates the external row number of the shelve. Displays in Row Management, within the control panel software.

7

 Heated Shelves (slots) Each slot has a top and bottom heater, regulated by the temperature set for the menu item assigned to that row.